Brickcon 2022 - Swag

If you go slightly earlier in the Blog, you can read about my BrickCon ‘22 virtual experience. Prior to the start I pre-ordered some swag. My shipment arrived shortly after Brickcon ended (like a few days later). I think I paid a little over $100, including shipping for my swag. Here’s what I received:

A custom printed minifigure is the first item. This one came with pants and a dress. The torso has the BrickCon logo on the front and then “Established in 2002” on the back. It has the original yellow minifigure head with smiling face and then a red hat. Also included is a coffee mug with the BrickCon logo printed on it. I like it!

Next up were printed bricks. You could get 2 custom bricks so I ordered one for each of my kiddos. One was yellow with black lettering and the other was blue with white lettering. They were excited to receive them. I also received a BrickCon 2022 brick, a BrickCon Volunteer brick for being a Trusted Virtual Guide (TVG), and then a Recognized AFOL Networking Event 2022 brick. My collection continues to grow.

Next was a small kit of parts to assemble the BrickCon logo in brick form. I did built and I proudly have it displayed on my desk. Perhaps I’ll have to look into making a bigger version.

This year also included a collectible metal cup with an engraved BrickCon logo on it and then a BrickCon deck of playing cards. I haven’t opened the cards yet, but hopefully they have something related to the theme versus the standard playing card design.

Also included was a back pack/bag branded by BrickNerd. Probably super useful to carry around the actual convention for storage purposes.

I purchased the shirt separately. As it was the 21st year of the convention, they felt like a party theme fit in so you get a cocktail of some sort with brick ice cubes.

Much like my last time, I got a bunch of bricks for trading. Since I wasn’t there, I didn’t get to trade, but they are some good pieces that they get through LUGBulk. I haven’t looked them all up on Brickset yet, but they all seem like bricks that aren’t super common. I got a bag of printed tiles from the Haunted House set. Not sure what I’ll do with all of them, but there they are. Anyone want to trade?

Lastly, I received convention model #184 of 250 made for the convention. The set box got a bit smashed during shipment, but it’s all good. I intend to build it versus adding it to the store. Sorry if you were looking for one. I will do a separate review of the set during another post.

Happy building!

BrickCon (Virtual) 2022 - Day 4

The last day of BrickCon!

First, I tuned into a Q&A session with Steven Walker about BrickCon and future events. Next year, the physical convention is moving to Bellevue, WA for the first time in 21+ years so there were a lot of questions about that. On the virtual side, they said they will keep it going as long as they can get at least 50 people to attend and they’d like to virtual side to go on 24 hours a day if possible during the convention as they know there are folks in different time zones. Maybe someday, I’ll make it to BrickCon in person.

Next up I attended the BrickCon Commerative Model Q&A with Chris Malloy. Chris has been designing the BrickCon models since 2017-ish. He lost count on the number he’s done in total. Chris went through the design process, challenges with parts, creating the box, designing the instructions, and getting the parts.

Here’s his slide where he introduced himself.

Here’s the final model design. Chris said designing the model was pretty easy. The challenges came in the rest of the process.

Chris mentioned challenges he had with new pieces not being in Stud.io, trying to make sure all the parts could be sourced using the LUGBulk program, and then some issues with printed pieces as seen in some of the examples below.

Here’s the copy of the box. Chris showed how he did a pencil sketch, colored it in, and then it became the box.

The custom tile is original to this set only. The left side shows some of the draft versions before the center one became the final version.

Chris mentioned that he had to add a lot of pieces during each step in the instructions to keep the instructions to a specific page count. This kept the price lower. They considered digital instructions, but decided the better option was to go with printed ones so people could build them at the convention and they wouldn’t have to worry about keeping the instructions active online for years to come.

Great presentation and great model Chris! Thanks to you and the BrickCon team for putting this together. I can’t wait for my set to arrive.

Next up was Stuart Harris from the LEGO® House again. He talked about how they go about developing the exclusive models sold at the brand store in the LEGO® House. Here are the last 3 sets.

Here are some concept models of #40501-1: Wooden Duck. Stuart built the concept models and then turned them over to another designer for the final production model. He also showed how they advertised the set within the LEGO® House.

One interesting note, Kjeld Kirk Kristiansen is the one who approves the sets and Stuart said that while he’s honored that Kjeld is the one to approve, it is pretty nerve wracking to bring a set to his office.

Here is #40502-1: The Brick Moulding Machine. It started off as an idea to make the moulds, but then turned into the machine that you can see in the LEGO® House today.

Next, Stuart talked about #40503-1: Dagny Holm - Master Builder. He talked about Dagny, getting the set built, and choosing what they would go with in a final set.

Stuart talked about the models they design for the LEGO Insider Tour as well, but the more popular discussion was this 3D printed duck below. Here’s an article from Bricket.com on the duck. This was recently released at the AFOL Fan Media Day as well as at Skærbæk Fan Weekend (I think). There were a lot of questions on this duck and a ton of interest. Stuart had one on hand to show off. He mentioned that it may return in a wider offering sometime in the future so we’ll see what happens.

The last presentation I participated in was by Becky Gorlin. She is a middle school level educator and LEGO Robotics Instructor at Granite Falls School District in Washington (about a 50 minute drive from Seattle and the convention area). I sadly didn’t catch the whole thing, but it sounded very interesting and it was cool to see how she uses LEGO in all aspects of education. I’m hoping they post this one online later.

Lastly, the closing ceremony. There were words of thanks, some admin notes, info on future conventions, lots of prizes, and then awards. I didn’t capture all of the awards, but here are the honorable mentions and winner of the Best in Show awards.

First, the 2 honorable mentions. These winners got a copy of #10497-1: Galaxy Explorer. Not sure how the group is going to share the set, but great build!

And the winner got a copy of #10305-1: Lion Knights Castle.

Nice work MOC builders!

It was a great convention, even if I did attend virtually. Thanks to those who worked hard to put it on and safe travels to everyone on their way home.

I will post more once my swag and the convention model arrive.

In the meantime, happy building!

BrickCon (Virtual) 2022 - Day 3

Back for more fun!

We started the day watching a tour of the convention floor before the public was allowed in. It was quick but great to see everything. I hope it gets posted online so I can go through it again and hit pause to look at things.

The first presentation I attended was by LEGO® House employee Stuart Harris. I have heard presentations by Stuart before and am familiar with the LEGO® House based on my 2019 visit there. I tuned in to get an update on some of the changes which was good. Beyond that, a lot of it was a repeat, but that was okay. Stuart was in person at the convention so that was a nice change versus having a lot of the LEGO® employees online.

The next event I attended was titled “Building Feedback: Peer Review in the LEGO Community” and it was presented by Kyle Keller who also writes for the Brothers Brick. Initially, I thought it was a bit ridiculous. Have we lost the ability to communicate with each other without hurting feelings or being rude? I would think this should be obvious, but I need to step out of my box and understand that the world is different. It was probably a good thing for people to realize that they can’t hide behind their online firewalls and need to give good constructive feedback. Kyle gave some lessons and then did practice with some pictures of old builds that he had. Props to Kyle for handling a challenging topic.

The last presentation I attended was by Deb Banerji titled “Lego Mosaics: Algorithms, Software, and Other Fun Stuff.” Deb built an open source program to take pictures and turn them into mosaics out of LEGO parts. He explained how he optimized the program, some challenges still involved, and a lot of other higher math that was above my brain. Very interesting though. The link to his site is below or you can find it here.

The awards ceremony was on day 3, but it was a bit late for me. I hope the best folks won!

BrickCon (Virtual) 2022 - Day 2

Day 2 was another great day. I started off by attending a few presentations. The first one was “The Lego News Room: Working at the Speed of Social Media.” This was about how LEGO in the US handles social media, carries on conversations across multiple channels, and keeps up with real time popular items. I’m not great at social media by any means so this was eye opening to me and it was interesting to hear what they had to say.

The next presentation I joined in on was “New Element Design from a Mechanical Engineering Perspective.” Two engineers from LEGO in Billund, Denmark talked about some of the parts they’ve designed, some of the challenges they’ve encountered, and what their experiences are working on the team.

Here are a few copies of slides they presented with examples of some parts the presenters worked on. They did specific parts, not the full minifigues.

They also showed us some of the software they use to make changes to parts. The picture below is an example of a part that they walked us through to talk about how they adjusted a part to improve its quality.

The next session I joined was an Ask Me Anything session with Jordan Paxton of the AFOL Engagement Team. Jordan helps run the LEGO® Ambassador Network (LAN) and while I have been a part of conversations with the LAN and AFOL Engagement Team in the past, this one was very heated and emotional. I was actually quite shocked how passionate people were. I’m not 100% certain on what is going on, but I guess a few LEGO User Groups (LUGs) were removed from the LAN and with that, they lost access to support from the LEGO Group and discount parts.

Two notes I did take were that we shouldn’t expect to see new set reveals at conventions and the brittle brown bricks issue has been solved, but LEGO has done a poor job advertising it. I guess the brown parts were stored at the top of the warehouse (warmest) and there was a color change issue that took place. Since then, they have added fans to warehouse and the issue has been fixed. What are you all seeing with your newer brown pieces?

The last thing I participated in was the Keynote presentation which was given by Angus MacLane. He is probably best known as a Director with Pixar, but is also an AFOL. I didn’t know it, but he was the fan designer behind set #21303-1: WALL-E. He stated that he was in the perfect position for the build as he was a part of the movie team so he knew about WALL-E well in advance and could start working on a LEGO version. Also, he was the one to approve the IP for Pixar so the LEGO designers had to work with him on any changes they made.

His introduction was given by someone in a Buzz Lightyear costume which was awesome!

He bragged that in making the Lightyear movie, he made sure the ship had a yellow windscreen to make sure that LEGO produced another yellow windscreen part. I don’t know how true that is, but I’m not sure I care. Glad the piece is out there now.

His talk was awesome, well put together, and very relatable for LEGO fans. As someone mentioned, this session was well worth the $25 registration fee to sign up. I actually think it may end up on YouTube in the near future. If it does, I’ll add a link.

The main purpose of the talk was to present how he goes about building MOCs. He uses the SUCCS method (defined below) and he went through various examples of builds he’s done and how he used this method. I don’t think I could do the talk justice here so just stay tuned for the video.

Onto day 3! Happy building!

BrickCon (Virtual) 2022 - Day 1

I took some time off from work to attend BrickCon 2022 virtually. It was also a good opportunity to do some building, sorting of parts, and organizing my store so I’ll take it.

Day one was pretty slow. This is due to the physical show just setting up so most of the attendees are assembling MOCs in the main hall.

For those of you not familiar, BrickCon is held in Washington state and this is the 21st year it has been held. 2020 kicked off the virtual side with COVID and BrickCon kept up a hybrid version in 2021. 2022 has a hybrid version as well. You can attend sessions via Zoom, there are games for virtual sessions only, and you have access to a Discord server just for attendees.

The first session I attended was titled BrickCon 101 which was an introduction to attending a virtual Con and was a good overview of the events going forward. I got to hear about some of the events like an auction happening over the weekend and some of the speakers. Also, Stuart Harris from the Lego House popped in to say hi.

Next up, I observed a speed build. I missed the sock build (build a set wearing socks on your hands). The speed build took set #31100-1 and an alternate build to the set was presented to the builders to assemble. The first one to finish won. The alternate build was a windmill and there were 5 participants. I was the only observer and then the BrickCon virtual host. As an observer, you’re supposed to heckle, but I kept my mouth shut mostly and watched. They finished pretty quickly and then a few of us chatted for a bit.

I re-joined my family for dinner and kiddo bedtime prep after this ended.

Next up was the opening ceremony. The virtual crew got to watch the opening ceremony going on live in Seattle. The presentation had a lot of administrative notes and then some information on moving the location in future years.

There were also prizes. In person attendees won a bunch, but the virtual crew also won a few to include…

This guy!!!! WOOHOO!!!

I won #71773-1: Kai’s Golden Dragon Raider from the Ninjago line.

This wasn’t new to those present in person, but for the virtual crew, we got to see the Convention Model for the first time. It’s titled “The Wooden Duck” and it contains 346 pieces. I don’t remember how much it cost, but I should get it sometime in mid to late October. I’m looking forward to it!

Lastly, I checked in with the virtual late night social for a bit before getting to bed. They were playing a LEGO based bingo game online. I played two rounds. You go to a web site, enter your info, and get a card. Then the host did random generated picks of various LEGO elements, minifigures, and other related items. I didn’t win, but it was fun and it was impressive to hear how many people knew which sets some of the obscure pieces were from.

I’m looking forward to day 2. It should be a few presentations and the key note speaker in the evening.

Happy building!

Brickcon 2022 - Registration Open

Brickcon 2022 is happening again this year in Seattle, WA on 1-2 October 2022. If you are an AFOL, you can register to attend the AFOL Fan Convention which starts on 29 September. They have limited in-person attendance for 500 people so sign up sooner rather than later if you plan to be in person. Registration is online here. For those of you who can’t make it to Seattle, you can still participate virtually. For a $25 registration fee, you can access presentation live streams, online games, tours, the private BrickCon Discord server, online social meet-ups, virtual door prizes, as well as a virtual exhibition with awards. A limited amount of swag bags, merchandise and commemorative models will be made available for purchase at a later date which is awesome. It’s not the full experience, but the hybrid option isn’t bad if you don’t live in the area or can’t fly to Seattle for that weekend.

I attended Brickcon 2020 or should I say virtually attended Brickcon 2020. It was fully virtual that year due to COVID so this will by my first hybrid experience. You can learn about my experience here: My experience. You can also read a quick intro here Intro and Swag and see a review of the convention set here: Convention Set Review.

I have not been able to attend a convention in person, but would like to some day. In the meantime, this is a great alternative option. I enjoyed the last time and I’m looking forward to this year. I’m hoping to be able to volunteer again like I did last time and with any luck, I’ll be able to purchase some swag as it included some cool stuff during my last venture to Brickcon. If you’re like me and can’t make it in person, but have the time to attend virtually, go for it!

The keynote speaker for this year is Angus MacLane who was the Director for Pixar movies like “Finding Dory” and “Lightyear.” The Brothers Brick site has a good write up about it here.

Hope to “see” you there!

BrickCon 2020 - My Experience

I posted about some of the swag I received and a bit on BrickCon 2020 here. This post will focus on the content. I attended a Brickworld Virtual back in May 2020 and that was a number of online rooms that yoiu could go into and out of at will. There were a few presentations throughout the day as well. BrickCon was a lot more than that. They had multiple sessions scheduled every hour, a Discord server running full time, Zoom rooms to hang out in, and lots of prizes throughout. All of the MOCs on display were on a private Flickr group page for viewing. While I would have preferred the opportunity to go in person, meet people, ask questions of MOC builders, and not be stuck behind my computer, the experience was definitely worth it in a COVID-19 context. Here’s a run through of some of the events I attended.

Tiago Catarino is a former LEGO Designer turned YouTuber from Portugal. You can visit his YouTube channel here. Now he posts small builds that you can do yourself with minimal pieces. He also has a few videos on what it was like to work at LEGO and why he quit (spoiler alert… it was not because he hated LEGO). Tiago had two sessions. The first was a Q&A for registered AFOLs only where he gave a short presentation and then people could ask him questions. The second was a build with Tiago session open to the public. I attended the registered AFOL session. Tiago shared some great info about working at LEGO, being a YouTuber, and some of his other experiences. Here’s a screen shot of him below.

The next one I attended was a public session where Stuart Harris presented to the public. If you don’t know him, he’s the lead designer for the LEGO House®. Stuart gave a presentation about how the LEGO House® was developed and built. Then he gave a description of each of the zones and what you can do there. Below are a few pictures from the presentation that I grabbed. The first is one of Stuart’s creations/Stuart working at the LEGO House®. The second is a brick built model of the Minifig Cafe.

Another one I attended was with registered AFOLs only and was a presentation by Gaute Munch (Lego Product Technology Director) and Flemming Jepsen (from the Powered Up team) on Powered UP. I am not an expert in this area by any means so a lot of the conversation was a bit over my cranium, but it was interesting to here. My experience has been motorizing the Crocodile Locomotive, but there is a lot that LEGO has in the works. Just after BrickCon, LEGO released a new version of the app which allows customization. They are working on a rechargeable battery box, new software, and a bunch more. Gaute and Flemming took some tough questions from the audience and handled them very well. I’m glad I participated in this one. The screen shot below is one of the slides with Gaute presenting.

Another event was a keynote where Andrew Becraft (The Brothers Brick Founder and Editor-in-Chief) interviewed Skip Kodak (Executive Vice President, Americas Market Group - LEGO). This was an interesting conversation covering a range of topics from sustainability to COVID-19 impacts for the company, to the adult focused products and lines. I’m glad I attended this one and thought it was great that LEGO offered up someone from upper management to participate.

Throughout the event, a number of AFOLs got on to share their MOCs. One of them was with Ben Smith who lives in the UK. He builds in the space theme and has some pretty impressive MOCs. You can see what he builds on his Flickr page. The screen shot below shows a classic space set, but he had a modern take on it and some other larger space crafts to show off. The benefits of having a virtual event is to get folks to participate in other countries to include people like Ben (and me!).

LEGO Designer Chris McVeigh gave a presentation and Q&A. If you aren’t familiar with Chris and his work, he designed the Brick Sketches™ and the latest Winter Village set the #10275-1: Elf Clubhouse. Chris shared his AFOL experience, how he was hired by LEGO, and then some details on designing the Winter Village set.

I sadly did not get to see this full presentation, but Graham Hancock gave a presentation on LEGO’s foray into catering to adult fans. If you’re not familiar with Graham, he run Brick Fanatics and is the deputy editor for Blocks Magazine. The part of the presentation I saw had details on the history of sets focused for adults. Some I remember and some I hadn’t heard of. And of course some that I wish I had.

I also attended a presentation and Q&A with Henrik Andersen. Henrik is a LEGO Designer who might be best known for his recent work on #75252-1: Imperial Star Destroyer. He’s been with the company for a while and showed some of the other sets he worked on an parts he developed. He went through the details of how they develop parts and showed what works and what doesn’t work. Most notably (for me anyway) I learned he was the developer of the cheese slope.

One last presentation I attended was with George Patelis. George lives in Greece and goes by PatGeo313 on his YouTube channel and Flickr gallery. He made a short video on some of his latest MOCs on YouTube here. Definitely check his work out as he has some impressive stuff.

That was a quick glimpse into my BrickCon 2020 experience. I had a lot of fun even if it wasn’t in person. I hope I can attend again next year and maybe some day get there in person.

Until then, happy building!

BrickCon 2020 - Intro and SWAG

I attended BrickWorld Virtual in May of 2020 and when I saw that BrickCon was also virtual this year (2-4 October), I had to sign up. If you’ve never head of it, BrickCon is normally a Seattle based convention. Based on a search online, it has been going on since around 2002 and is usually the first weekend of October. Hopefully someone can correct me if I’m wrong.

The convention was in the Pacific Coast of the US time zone so being 9 hours different didn’t help much as I would miss a bunch of the late night/early morning happenings. I did however sign up to be a “trusted virtual guide.” I don’t know how trusted I can be with leading people around virtual conventions, but it gave me a chance to help out and meet some new people. I’ll go into the convention in a separate post. For now I want to talk about the swag.

To attend as an AFOL you had to pay a bit more than the $5 the public paid, but they had various levels ranging from $25 to $90. I went for the biggest package being that it was my first BrickCon and I wanted to see what it was all about. So here’s what I got…

Tee-Shirts!

The first one is the Convention shirt and was designed by Kevin Hinkle. I definitely had my phone and computer on so that accurately reflects me(no tablet though). The next one is my TVG shirt to designate that I was one while on screen. I didn’t have the background set up for Zoom and you really couldn’t see the shirt, but that’s okay.

Also included were a few printed bricks. You had the option to get some custom ones so I got one that had my blog name. It also came with the yellow BrickCon 2020 brick. Finally, it had the white one which on the back says it is a recognized AFOL Networking Event. I stacked that on top of my BrickWorld brick so I can say I have attended two.

Still more swag… Next up was a baby minifig with the BrickCon logo on its shirt. Super awesome! Also, there was a 2x4 tan tile with the logo for this convention to include the date. Note the blue plate behind them is just from my collection to take the picture. It didn’t come with the swag pack.

Additionally, there was this fun pin with the logo. I’m not sure of the reason for the split up. Is it supposed to be like the shape of the LEGO House®?

I have not been to a physical convention yet, but apparently BrickCon hands out bags of parts for you to trade with other attendees. They did the same this year and you could then set up trade with people who live near you or I guess mail them to each other. I got six different parts and thankfully they are not standard bricks or plates. There’s a printed window panel, a tile with studs on the bottom, a larger window frame, a round 2x2 with an odd bottom (not sure what to call the light greenish one), a gold colored slope, and then a light gray 1x1 roof type slope. I’ll have to figure out how to build with these, but since I had never seen most of them, I’m pleased with what I was sent.

Lastly is the Con model. This one was designed by Chris Molloy. He’s the managing editor for the Brother’s Brick and a LEGO Ambassador. I have not built the set yet, but will and will post a review. The model is in a post disaster type world with a space minifigure exploring the ruins. The space minifigure comes in a rare orange color in the classic space theme. There are a few other cool pieces included. I look forward to digging into it.

Okay, that’s the cool swag. Are you drooling yet? I was super excited to get the container in the mail.

I’ll post later on some of the events I attended.

Happy building!