Set Review - #40370-1: Steam Engine

I wrote about the 40 Year Anniversary train set released in March 2020 as a gift with purchase back in this post. My set arrived and I had a chance to put it together. Here’s my review. The set contains 188 pieces and 1 minifigure. It is no longer available from LEGO so time to find it on the secondary market if you missed it (sorry).

If you want an in depth review from some LEGO train experts, check out the Brick Model Railroader’s review at this link. They go way more in depth into the model that I ever could. I will just give you my opinions.

Here’s the box. It’s nothing too special other than it does have the old logo on the bottom right of both sides.

The contents are 3 parts bags, a sticker sheet, and 4 large pieces to include 2 red 2x16 plates and 2 light gray 6x10 plates. The instruction booklet focuses on the build only and doesn’t have any fun details about the anniversary or the history of LEGO trains. It’s a gift with purchase set so I guess they can’t put too much into it. While I am not a fan of stickers, I do like the metallic look of these stickers. The silver color goes well on the set. Especially the 40 year sticker.

The build isn’t broken down in the instructions or by bag so I picked a few logical points. You start with the minifigure dressed in the old outfit with 2 dots for eyes and a line for a face. You also build the base of the set which is very similar to the Architecture line of sets only you have to apply the sticker for the set name versus having a printed tile. You also attach the 40 years sticker here.

Next is the base of the train. I can’t remember the last time a set came with 2x10 bricks. The base is pretty simple only it includes some Technic pieces which I’m pretty sure were not included in the original set.

And then the final thing. It is mostly studs on top and is a pretty simple build. There is no magnetic buffer so you’ll either have to use one or create one if you plan to hook this up to a train. The buffers are a fun design and something I’d consider using on a MOC in the future if necessary.

So If you look at my front and back view pictures, you realize that I need to space the wheels out a bit more so the engine can fit on the stand. Otherwise, you get a crooked display like I have. Whoops.

Overall, it’s not a bad set. As a train fan, I like it as it goes back to the original days of trains, but it has a few of the modern upgrades. I would have preferred for it to be displayed on a track, but I’m sure that didn’t happen due to cost and the goal to keep this set small and cheap to produce.

If you want to get this set, sadly you’ll have to get it on the secondary market and I’m sure it’s going for quite a bit by now. There’s no telling if LEGO will offer it again or not.

As to whether this is a sign of things to come at LEGO, it’s hard to say. I doubt the train theme will pick up with any force beyond what is out there. Would I love to see a Creator Expert style train line again, you bet? I’m not keeping my hopes up though.

What are your thoughts? Is this a sign of changes at LEGO? Or just a fun set to remember an anniversary?

Happy building!

Set Review - #80105-1: Chinese New Year Temple Fair

I’m excited LEGO has continued with this special edition theme of sets related to Chinese culture. This is the third one. The first was #80103-1: Dragon Boat Race and the second was #80104-1: Lion Dance. #80105-1: Chinese New Year Temple Fair was released on 15 January 2020 in the US. It contains 1,664 pieces and 14 minifgures. It costs $119.99 in the US which works out to be $0.072 per piece. I found it locally for around $99. Be on the lookout for discounts in your area if you can find them. It’s priced well already, but a $20 discount is even better.

Onto the review…

The box is bright red and picks up the theme with fireworks, a rat for the “Year of the Rat,” a depiction of the set, and then showing all of the minifigures. The back shows the various play features.

The set contains 10 parts bags. They are labeled one through nine with two bags labeled numbered one. There are three instruction booklets that are packaged and in good shape. Most importantly there are no stickers! WOOHOO!

The first two bags include a tree with some decorations to include some banners and a lantern. The tree is a simple build, yet it still fits in well to the overall design.

It also includes the first stand for the fair. This stand is a food stand with some cooking food on a stick, some cookie type items, some chicken legs, and some fun cake type items with faces. There is a red flower bouquet attached to the stand as well. There is a small cooking area with some extra supplies, a knife, and space for the minifigure to work. My favorite part of the stand is the roof. I like how the designers were able to replicate the look of Chinese architecture and that each stand was done in a slightly different way to make a similar styled effect.

This bag includes the first two minifigures to include a stand vendor/cook and then a happy festival attendee.

The second bag includes another stand. This one is a toy stand with a lot of fun details. There are some lollipop looking items, some balloons, and then various toys to include a small airplane, a panda bear, a duck, a rabbit, and a rat.

I included this stand in a picture with the stand from the first set of bags as they are connected by a string with lights, lanterns, and banners.

Additionally, you get two more minifigures. One is a vendor and the other is another male minifigure attending the festival.

The third bag starts the temple build. It begins with the base. I like the base as it includes a great flower design with the 1x1 flower piece and some greenery for leaves in the front. The stairs are a simple yet useful design as they added in studs for minifigures to be fixed to and they added in some design other than increasing the number of plates to climb up. I’m also a fan of the greenish colored pieces under the light gray arches. I’m not sure what they are called, but I like the effect it achieves.

This bag includes a boy minifigure. He has a red scarf and his holding a… um… I’m not sure what it is. Anyone know?

The fourth bag starts the structure of the temple gate. The build is fairly simple, yet full of detail. You can see initially some of the printed tiles that add to the design. Along with the lanterns and the gold colored pieces, it really stands out. The pieces on either side of the door are the brown 2x2x2 “box” pieces used in other sets stacked on top of each other. It’s a great technique to get some texture versus using plain bricks.

This bag includes a female minifigure with a small purse.

The fifth bag starts part of the roof of the temple entrance. The color scheme really pops with the yellow, orange-yellow, gold, and red. I like how it sticks with the Asian roof theme used elsewhere.

You get a girl minifigure with a scarf and holding a lai see or red envelope typically given as a gift with money in it.

Bag six adds part of the roof section with more printed pieces with Chinese calligraphy.

You also get a male minifigure holding a baby bottle (a hint of what is to come).

The seventh bag finishes off the temple with the second layer roof. It is built in the same manner as the first layer and looks equally impressive. My only complaint is that it is just this gate and not an entire building. Perhaps that would be a future challenge… building the full structure.

One note in building the roof slopes is to make sure the orange 1x1… um… I’m not sure what the new pieces are called. “U’s” or tunnel looking pieces? Whatever they are called, you just have to make sure they are in line. If they are not all straight, the build doesn’t look as good. I had to adjust a few as the angle I put them on were slightly off. Not a big deal, just something to pay attention to when building.

The last bag had a male minifigure with a baby bottle. This one has the female minifigure, the baby, and a stroller. The female minifigure has a fun hat on over her hair which is new (I think). The stroller is fine although a bit big. The parents have to put their arms up in order to push the stroller. I may have to look into adjusting this later on.

The eighth bag come with another stand and another tree. The tree is very similar to the last tree. The stand sells some pottery type items and some microfigures in various colors. The set comes with a bunch of extra microfigures too which is a nice bonus.

You get two more minifigures in this bag. An older adult female and then a younger one.

The ninth bag assembles the last stand which is a shadow puppet theater. The highlight of this build is the cool shadow theater pane that is printed and not a sticker. It goes along with the rest of the set which doesn’t have stickers. Yay for the amazing number of printed pieces! This bag also assembles some fire crackers, and some gifts to sell or give away.

You get two more minifigures. An older male to run the puppet show with his microfigures and dragon for the show and then a boy with a lai see envelope. The boy has a fun winter hat which I don’t recall ever seeing before.

The final part of this build is another strand of lights with Chinese lanterns and a banner to connect the stand from bag eight and this bag.

So that does it. Here’s a picture of the full set. It’s not a great angle, but you can see everything you get. There is a lot going on in this set which definitely helps to justify the price. Besides the great price per piece, you get 14 minifigures, the temple entrance area, two trees, and the four stands. To encourage you to spend money, this one goes well with the other two Chinese themed sets. You could easily make a larger themed “China Town” or festival area. I’m thankful to have found this one at $20 off, but probably would have paid full price had I not seen the sale.

Finally, a few pictures a little closer and at different angles. LEGO has said they’ll keep these around for six months or so. We’ll see how long they stay on shelves, but don’t wait too long to buy if you are interested. As of the writing of this post, LEGO is running double VIP points so it might be a good opportunity to scoop this up (along with a few freebies).

I was very positive on this set. What am I missing on the negative side?

Happy building!

Set Review - #80104-1: Lion Dance

After two regional exclusives where everyone was mad they had to buy on the secondary market, LEGO has stuck to their word. #80103-1: Dragon Boat Race was released in 2019 and in 2020 so far two sets have been released. The first one I’ll review is #80104-1: Lion Dance and it was released on 15 January 2020 in the US for $79.99. With 822 pieces it works out to be $0.91 per piece. I manged to pick it up locally for ~$67 so I can’t complain.

I didn’t do any research behind the traditions behind the set, but the Brother’s Brick did. Check out their set review here if you want to learn more about the choice of colors and symbols used.

The box is bright and colorful with the set displayed on the front with a rat for the”year of the rat.” The back shows some of the play features and details of the set up close.

This set contains six parts bags and an instruction booklet that is wrapped to protect it. Additionally, you’ll notice there is no sticker sheet. WOOHOO!!!! There are a lot of printed elements in this set, but no sticker attachment required.

---

The first bag begins with a minifigure holding some lettuce to feed to the lions and two lions with identical builds. The lions both have minifigure legs attached into 2x6 bricks. The remainder of the lion is built off of there. The slopes on the side of the dragon are all printed which was awesome! The lion’s head has some fun details and piece usage with white banana pieces, white frogs, and the printed eye pieces. The head can rotate up and down and the mouth can be opened or closed.

Of note, this bag includes a teal piece separator for when you just can’t pry apart those plates.

---

The second bag includes a minifigure with fire crackers, three minifigures who play music (cymbals, a drum, and a gong), and then another dragon with a similar build technique as the previous two, but with some slightly different details and colors.

I like how the musicians were done. Especially the use of a large wheel as a drum. The stand they are on works great to fit them all and they tie into the color scheme of the set well. The drummer is on a spinning piece so you can move him back and forth as if he is drumming.

Lion number three has a slightly different mouth and some gold details along the edge of the body. Other than that, it is built pretty much the same except for the mostly white coloring.

---

The third bag is the stage. The lions don’t exactly fit on the stage after it is built and I didn’t try to have a dragon balance on one of the poles like shown on the box. Seems like it would fall over pretty quickly unless you got the center of gravity just so. And while it may not work great for a minifigure, you should definitely check out some of the videos of Lion Dances on YouTube. There are some crazy stunts that they do and the set will make more sense to you after you see what is going on.

The front paneling pieces in the center of the stage are pretty cool though. Could be useful in other MOCs down the road.

---

The fourth bag builds the last 2 lions and then a minifigure with Chinese calligraphy on a scroll or tablet. The lions use the same technique as the other 3 only have slightly different coloring with a focus on the color gold.

---

Bag 5 starts the gate structure. It’s a simple build, but I am a big fan of the printed tiles. The design on them is very cool and so is the coloring. You also get some more teal pieces and some gold fencing for decoration.

This bag includes an older male minifigure holding a paint brush. Supposedly it is the mayor and he is finishing painting one of the dragons.

---

The last bag (number six) finishes off the gate. The roofing is added, more frogs appear, and brightness of color abounds. The yellow and orange really make this gate stand out. I like how the designers achieved the Chinese architectural style without getting too crazy into detailed building.

Lastly, you get a minifigure dressed as a rat for the year of the rat. He rounds out a great assortment of minifigures in the set which help to make the set worthwhile.

---

Here’s the final set. Overall I think it’s great. You get 8 minifigures (not including the legs of the lion dancers) and some great pieces. There are no stickers and a lot of great printed pieces with some fun new details. Building this set really made me want to create my own scene with crowds watching, food stands, and other details. I’ll add that to my list of all the things I want to build in my spare time.

I definitely recommend this set and I think this line is worth it. I hope LEGO continues this line and comes up with other similar ones. Hopefully like me, you can find this one on sale to save some money. Just keep in mind that the shelf life of the set will not be long. I believe it is only supposed to be 6 months so don’t wait (can someone confirm that?).

What are your thoughts?

Happy building!

Set Review - #75946-1: Hungarian Horntail Triwizard Challenge

This should be it for the 2019 Harry Potter serts. #75946-1: Hungarian Horntail Triwizard Challenge was released on 1 July 2019. It retails for $29.99 in the US. At 265 pieces, it works out to be $0.113/piece which seems a bit steep to me. Let’s dig into this one to see if it is really worth it.

The front of the box shows the built set in animated action. I think it would be better if the design was all brick built, but I figure they have to split out the bricks to show what you actually get in the set. The back shows some of the play features to include the tent opening and the movement of the dragon.

The contents are 2 numbered parts bags, a small sticker sheet, the instruction booklet, and the dragon’s wings.

---

The first bag builds Harry, Fleur, and the dragon itself. Given the scale of the set, I think the dragon was done quite well. The details and coloring are fairly close to what you see in the movie and thankfully it was not just a giant BURP that you attach to the wings.

---

The second bag finishes up the set with the tent used by the Triwizard Champions and then the chain to hold down the dragon that is guarding the golden egg.

The tent is a very simple build and doesn’t have much exciting to it. The stickers go inside the tent.

The egg and the holder are rather plain. From a play standpoint, it meets the mark, but it could also go well as a part of a larger MOC recreating the scene from the book/movie.

---

This set comes with 4 minifigures. They are the 4 Triwizard Champions… Harry, Viktor, Cedric, and Fleur. They are all in their uniforms for the dragon challenge. I think this is the first time they have appeared in these outfits, but I’m not sure. Each one has wands and Harry has his broom.

Overall, this set doesn’t have much to it. The price is a bit steep in my opinion for what you get even with the 20% off sale from Amazon.com. If you’re looking to pick this one up, definitely wait for a sale. The dragon is a pretty cool, but beyond that, the set lacks anything exciting. However, it could be a good start to a larger MOC if you are looking to re-create the scene from the movie/book.

What are your thoughts on this one?

Happy building!

Set Review - #75948-1: Hogwarts Clock Tower - Harry Potter

I am finally reviewing the last of the Harry Potter sets from 2019. This one is #75948-1: Hogwarts Clock Tower. It was released on 1 July 2019 for $89.99 in the US. With 922 pieces, it works out to be $0.098 per piece. This isn’t too bad, but I obviously would have preferred a lower price. I have not seen this one go on sale yet, but I did get it for double VIP points before Christmas so I can’t complain.

This set is based on the the fourth book/movie in the Harry Potter series titled “The Goblet of Fire.” The set itself portrays the Tri-Wizard’s Tournament Yule Ball. Onto the review…

The box front shows the front of the set assembled with the minifigures by tables and a Christmas tree. The back shows the internals of the set and some of the features to include the moving clock and how you can set up the minifigures to “dance” on one of the set pieces.

The set contains six parts bags and 2 light gray octagon pieces (not sure of the official name). The instructions are sealed with the stickers. The instructions are just instructions and no extra details or anything. The stickers are one sheet with multiple stickers and one with a larger sticker (ugh!).

The first bag builds a part of the ball room area. In seeing the pieces ahead of time, I was curious how it would all get assembled. In the end it turns out that there are System gear pieces versus Technic and they are linked together. You spin the light gray octagon around and the white circles rotate. Then you can position the minifigures so it looks like they are dancing. Definitely an interesting way to do this, but I’m not sure it adds much to the set. The set is listed as ages 9+ so maybe the younger crowd enjoys setting up the minifigures so they can dance.

There are 2 tables for drinks. The legs are icicle pieces and they have some fun “ice” decorations on top.

This bag also contains Viktor Krum and Madame Maxine, but I’ll go over the minifigures later.

The second bag adds a tower which can be attached using Technic pins to the ball area. The tower has 2 floors. The bottom floor is the bathroom where the students have to bathe to hear what the egg is telling them. If you don’t know what I’m talking about, just watch the movie. The large mermaid sticker goes here and you get the fun of having a large sticker and trying not to get air bubbles in it. I was successful, but it took a few tries.

The upper level is Dumbledore’s office. The phoenix and sorting hat are stickers on the wall. The sword of Gryffindor is above him and the pensieve is there too (had to look up what a “pensieve” was). In terms of the actual locations in the castle, I’m not sure if they are all correct, but then again I am not sure of the floor plan of the actual castle so who knows? I think they were looking for the chance to re-create as many scenes as they could from the book/movie with this set.

Fleur Delacour and Albus Dumbledore come in this bag, but more on minifigures later.

The third bag starts the build of the actual clock tower. This bag builds the first floor of the clock tower. I think it is the room where students can put their names into the cup to be chosen for the Triwizard’s Challenge. I’m not actually sure and I’m not certain why the treasure chest is there. Either way, it serves as the base to the tower.

Ron Weasley and Cedric Diggory come in this bag.

Bag 4 builds another room. This one appears to be the defense against the dark arts classroom. I am a fan of how the external part of the clock tower looks. I’m not sure how accurate it is compared to the movies, but the design is simple, yet it looks like it is part of the castle. The build is mainly stacking bricks, but the designers get the detail across with some difference pieces and color changes.

The inside has details from the movie to include the chalk board with a sticker that tells from things from the book/movie, the glass where Mad Eye put something inside, and then there are a few items along the wall as well as one chair for a student.

Hermione Granger is in this bag even though I didn’t include the minifigure in the picture.

The fifth bag almost finishes the clock tower and it includes the Harry Potter minifigure. The outside includes the clock face which is a cool printed piece. The clock hands are pieces from the standard LEGO tool kit (and you get the extra tools for other MOCs). The roof slopes here or at least you complete part of the slope.

Inside this floor is the hospital or clinic or whatever they call it. There are 2 beds for patients. This is the first time where I’ve seen LEGO use jumper plates so the minifigures can actually lay on the bed.

Also, based on watching the movies, the clock is near the hospital area so this is somewhat accurate to have these two sections nearby each other.

Much like #75954-1: Hogwarts Great Hall, this set has a decent number of minifigures which makes this set a must have for fans of the Harry Potter minifigures. All of them are in their Yule Ball attire which I’m not sure has been done before. Does anyone know?

I’ll use the order of my picture below to go through them:

Cedric Diggory - This minifigure last appeared in the Harry Potter collectible minifigure set (#71022). Not bad considering he only makes an appearance in one book.
Fleur Delacour - This character is also in #75958-1: Beauxbatons' Carriage: Arrival at Hogwarts™ so the second time she’s appeared in a 2019 set.
Viktor Krum - I think this is the first time since the return of Harry Potter in 2018 that we’ve seen this minifigure.
Madame Maxine - This character is also in #75958-1: Beauxbatons' Carriage: Arrival at Hogwarts™ Hermione Granger - I’ve lost count of how many of the big 3 we’ve seen. Hermione has on a dress and instead of giving her a slope bottom to show the dress it is just printed on. There is a printed 1x2 brick with a 1x2 plate below it. I’m not sure why they didn’t go for a smaller slope piece like Fleur has on, but okay.
Harry Potter and Ron Weasley are in a lot of sets. Now you get them in their Ball garb.
Albus Dumbledore - Dumbledore is in his Ball garb as well. What I found interesting is the head of this minifigure has his glasses on one side and no glasses on the other.

Overall, a good collection of minifigures in my opinion. Everyone has a wand too.

The sixth bag completes the build. The roof and the last turrets on top of the clock tower are built. You also get a small Christmas tree for the ball room. Additionally, a second, smaller clock is added to the main clock face.

Overall, the build is not too complicated, but it does have some interesting techniques like the gears used for the dancing area. There are some decent pieces for other MOCs although not a wide range of colors. The designers crammed a lot of play features into a small area that were probably spread out across the castle, but I get why they did that. It probably doesn’t match the actual castle from the movie, but again it is designed for play and not as a Creator Expert type set. In terms of price, the set is about average in terms of price per brick and I have yet to see it go on sale. Like #75954-1: Hogwarts Great Hall, this set has not been on the active sale list on places like Amazon.com. If you are looking to pick it up, look for other opportunities like discounts at specific retailers or promotions from LEGO itself.

Like most of the other Harry Potter sets, if you’re not a fan of the series, I don’t recommend picking up this set. The build wasn’t that great, but fans get some great minifigures and another piece of the book/movie series.

What are your thoughts on this one? Just another play set or a well designed version of Hogwarts?

Happy building!

Set Review - #40337-1: Mini Gingerbread House - Creator - Limited Edition

I’m a little late on this one, but I wanted to catch this set before it was too late. #40337-1: Mini Gingerbread House was a gift with qualifying purchase from LEGO in December 2019. It contains 499 pieces and is a mini build of #10267-1: Gingerbread House from the Creator Expert line.

The front of the box shows the set in front of a winter scene. It also has a red ribbon with a “Limited Edition” marking on it. The back of the box shows set #10267-1. I guess it’s so you can compare the two. Or maybe they needed some advertising space?

The contents are six parts bags, 2 instruction booklets, and a sticker sheet with one sticker on it. The parts bags are labeled one through three with three number ones, one number two, and two number threes.

As expected with any mini build, the pieces are rather small. As you can see, most are tiles or plates and most are 1x1 or 1x2. There are very few bricks as compared to plates and tiles. The 2019 sticker goes well on the set and helps to make it a true limited edition for the year. I’m actually a fan of this one. Probably because it is larger and there is only one sticker.

The bag labeled number two completes the first floor and you can see most of the details from #10267-1 miniaturized in this set. I think the designers did a great job at capturing the main details while still making it somewhat realistic. As you can expect, they didn’t build the internals of the house since there is not a lot of room. The back is instead just closed off as a wall with no details. I’m okay with this choice versus adding in extra details as you will probably just display the front of this set anyways.

The third set of bags finishes off the set. Overall it’s a fun build. I actually built it with my 5-year old and she did a pretty good job at getting it right. I had to guide in a bunch of spots, but she managed to get the hang of the SNOT techniques used on the roof pieces.

Overall, I think LEGO did a nice job with this set. Sadly, you’ll have to look on the secondary market for this one now. Usually these sets go for $25 to $30. Do they go higher? On some occasions in the past, LEGO has done a Christmas in July promotion where they have brought back Christmas sets the following July as a gift with purchase. No telling whether that will happen in 2020, but if you missed out, pay attention to in the summertime to see if that deal returns.

What do you think of this set? Did you get it with a purchase and was it worth it?

In the meantime, happy building!

Set Review - #75947-1: Hagrid's Hut Buckbeak's Rescue - Harry Potter

It’s 2020 and I’m still working my way through the 2019 sets. With a goal of getting sets of sale, I usually wait to purchase so I don’t buy at full price. #75947-1: Hagrid’s Hut Buckbeak’s Rescue was released on 1 July 2019 in the US for $59.99. With 496 pieces, it works out to be $0.121/piece. This is a bit high, but I picked it up for 20% off at Amazon.com in the US so it made it a bit more affordable.

Onto the review…

The box is pretty standard with the front showing the set while the back shows the play features. One note you’ll see is this one has a light brick which is not normal for most Harry Potter sets.

The contents include 3 parts bags, a small bag with Buckbeak, an instruction booklet, and a sticker sheet. The instructions and the sticker sheet were shoved into the box and they were pretty beat up. Despite the folded up stickers, I was able to apply the stickers without showing any of the damage permanently. Of note, the first bag includes a piece separator.

The first bags start construction on the main part of the hut. It builds up the initial wall along with some of the interior furniture. The outer wall looks a little too squared off in my opinion. I’m not sure how I would re-design it, but I think it would be better looking if it look like a stone hut versus having squared off blocks in it. The sticker on the front door helps with the details some, but I’m never a big fan of stickers.

The interior so far has a chair, a candle, and a container that holds a shovel and umbrella.

The second bag finishes the first part of the hut. I like how the roof is built to match how it is portrayed in the movie. I also think it would have been better if the whole building was built versus just half, but I’m sure it is for the play factor and price point.

The interior is fun with a table and chairs, a sack, some utensils hanging from the ceiling, and a broom. I haven’t done the research to see how accurate it is as compared to the movie, but it seems like it is close from my limited memory of what the hut looks like in the movie.

The light brick is added here and shines down on an egg in the fireplace area. Not sure if he is supposed to be warming it to eat or if he’s warming it to incubate it. Either way, I think the light brick is unnecessary in this set. I’d rather remove that part/expense and add some additional detail to the set.

The third bag finishes off the set. It adds a second room that looks similar to the first room only is slightly smaller. There is a doorway to pass from the larger part of the hut to the smaller room. The exterior of this part of the hut looks similar. The interior has a desk with a candle and a copy of the Daily Prophet newspaper as a 2x2 tile. It also contains a chest with a brown frog inside and a spider crawling around on the ceiling.

Externally, there is a small pumpkin patch with pumpkins growing on vines. There is also a chain to attach Buckbeak to as seen in the movie “The Prisoner of Azkaban.” For a simple pumpkin patch, I think it looks good with some larger pumpkins and some smaller ones still growing.

This set comes with six minifigures. According to Brickset, from left to right and top to bottom there are the following:
Executioner - Walden MacNair: The movie does not give his name. Maybe the book does? Either way I think they captured this character who plays a small part in this book/movie well. The large ax like tool that he has matches what is used in the movie well.
Rubeus Hagrid: This character is similar to other LEGO versions and again he carries a lantern.
Minster of Magic - Cornelius Fudge: I think they got this one right. I am a fan of the hat.
Ron Weasley, Hermione Granger, and Harry Potter are all mid-size minifigures. They have the smaller legs, but not the tiny ones that do not pivot. The outfits seem to match the movie outfits well and they each have 2 facial expressions and a wand.

For Potter fans, the Buckbeak figure is the bonus for the set. I think LEGO captured the likeness of the character well. The head can move up and down and you can angle the wings. There are studs on top of Buckbeak as well which allow minifigures to sit on top for a ride.

Overall, this set was middle of the road for me. It wasn’t bad, but not something I would go rush to buy at full price. The 20% off helped and even more would have been better. I’m curious as to how much the light brick adds to the price of the set.

For Potter fans you do get 6 minifigures as well as Buckbeak so that’s not too bad.

As a builder, I would have preferred a little more detail to the outside of the hut and potentially the full hut versus just part. Although half the set is a good start for those who want to build the rest on their own.

What are your thoughts on this one? How would you change this set?

Happy building!

Set Review - #10267-1: Gingerbread House - Creator Expert - Winter Village

LEGO has a few lines where they repeat the theme at specific times each year. The Winter Village is one of those themes with 2019’s set being released on 1 October 2019. #10267-1: Gingerbread House retails for $99.99 in the US. It contains 1,247 pieces which works out to be $0.068/piece. As of late, LEGO has been discounting these sets at their end of life time period which is usually after 3 years (but not always). You can look for deals at other retailers too so be on the lookout!

Here’s the box. The front of the box shows the full set while the back of the box shows the back of the set and some of the play features. The box also notes that you get a light brick with the set which seems to be pretty standard for the Winter Village buildings.

The contents are 10 parts bags. The bags are labeled 1 though 5 and there are 2 bags each. You also get a 16x16 white plate. Additionally, there is a sealed package with the instructions and a small sticker sheet. The instructions contain 2 booklets. The first is for the first set of bags and includes everything not attached to the gingerbread house. The second is the build for the house.

I was glad to see a small sticker sheet with only 3 stickers on it. The stickers were also decent sized so I’m glad I didn’t have to put stickers on 1x1 or 1x2 tiles. This set gets the detail by using bricks and printing. Yay!

The first 2 bags build everything not connected to the house. There is a small Christmas tree which has some similarities to last year’s set (#10263-1: Winter Village Fire Station). I like the star on top and the piece they used to create it is pretty cool. I’m not sure if it is new or not, but I hope to see it again.

The two minifigures are in this bag too. From what I recall, the gingerbread man first appeared back in the Series 11 Collectible Minifigures set. Is that from 2013? Now we get two different versions. The male version has a mustache and the female has a skirt on. There is also a 1x2 tile for the baby. Along with the baby is a bottle about the size of the baby and you build a small carriage with cookie wheels to push the baby around in.

There is a snow blower which is cleverly designed and it looks like it could be candy made.

The second set of bags starts the actual gingerbread house. The floor has some great tiling work. I’m also a big fan of the translucent, sparkled 1x1 bricks for the windows. I always like the 1x2 or 1x4 bricks with the brick texture on them. No complaints thus far in the build.

The third set of bags finishes up the first floor of the house. The fireplace reaches through the front of the house and into the first floor. I’m not sure I’m a fan of this, but I’m guessing it is so you can show the light brick on the inside and the outside. The inside has some good details to include a little kitchen, some furniture, and some decorations. Given the small space, I think the designers did a good job at making sure it was detailed without going overkill on details.

The fourth set of bags builds up the second floor. The use of white tiles and bricks to make the roofs look frosted is cool along with the 1x1 round tiles to make is seem like there are candies as well. You can see the bathtub and the start of the bathroom on the interior of the second floor in this bag too.

The fifth set of bags finishes off the house. The roof is completed and the upstairs details are completed. I’m a fan of the multiple slopes on the roof versus just one slope. The use of many angles makes it look more like a house.

The interior details include a lamp, a bed, the crib, the rest of the bathroom, and the toilet. Again, great use of parts to maintain the candy feel while adding details.

Here’s the final picture with everything from the set. Overall, I like this set and I think it was worth the price they set on it. It was a good build with some interesting techniques and some great pieces. The minifigures are fun and this set fits well within the Winter Village sub-theme.

Downsides to the set… I would prefer the full building versus just a half. I realize it would drive up the price or cut down on the detailing, but the builds limit how you can display the sets. Everything has to face one direction or you have to build your thoughts for the rest of the set on your own.

If you’re a fan of the Winter Village sub-theme, I recommend picking this set up. Look for opportunities to get it on sale or to get double VIP points or other bonuses if it is not on sale.

Happy building!

Set Review - #40367-1: Lady Liberty - Brickheadz

It’s been a while since I picked up a Brickheadz set to build. LEGO was producing these things like crazy for a while and they’ve dialed it back quite a bit. Most of them are now not part of licensed themes which I think I prefer. Set #40367-1: Lady Liberty was released on 12 June 2019 in the US for $9.99. It contains 153 pieces which works out to be $0.065 per piece. I got it from LEGO during their Black Friday sale for $7.99.

Onto the review…

The box shows the set on the front and then the back shows some Statue of Liberty versions from around the world to include Paris and in Japan.

The set contains 4 small, unnumbered parts bags, an instruction booklet, and a 6x6 black plate for the base.

Given the size the the build, it didn’t make sense to break the build up so here’s the final set. The build definitely fits the style of Brickheadz while still capturing the likeness of the Statue of Liberty. The right arm with the torch is tucked in close versus being raised up like the actual statue. Also the face and eyes match other Brickheadz.

There is some detail to capture the likeness of the Statue of Liberty, but not a ton. What would you expect in such a small set? The crown looks a bit odd in my opinion. The view on the front of the box looks okay, but from the top down it looks a bit rough. Another note, there is not base to the statue like in the actual statue, but as they call this “Lady Liberty” it should be expected that it is just Lady Liberty and not the base.

Overall, it’s not a bad set. If you’re a Brickheadz fan, I’d definitely pick this one up. For non-Brickheadz fans, it’s up to you. One of my reasons is below…

Okay so I thought it was fun how LEGO has two different representations of the same item. One is a bit more realistic, but they both still capture the same thing. They even have the same torch flame piece. I need to build some kind of stand for the Brickheadz version though.

Happy building!

Set Review - #21046-1: Empire State Building - Architecture

A few weeks back I reviewed #21042-1: Statue of Liberty which was released back in 2018. I was so impressed that I picked up #21046-1: Empire State Building. This set was released on 2 August 2019 in the US. It retails for $129.99 in the US and with 1,767 pieces it works out to $0.074/piece. I found it locally for around $85 so be on the lookout for discounts.

Back in 2009, LEGO released #21002-1: Empire State Building (Brickset link). I have that set, but it is back in a storage container somewhere in the US so I won’t spend a lot of time talking about it other than mentioning that #21042-1 is being released 10 years later.

The Empire State Building has been a popular build out of LEGO bricks. A quick search just on YouTube shows numerous fan built models at much larger scales then this set. Take a look if you have a minute.

Here’s the box. The front shows the set while the back shows the set next to a picture of the real building. It also mentions the full set height at 21.5 inches.

The set contains 9 parts bags. They are numbered one through five with five being the only one that has a single bag. There is also an instruction booklet which provides some information on the building in the front as well as throughout the build.

The first set of bags builds the base of the building. It includes the standard printed black tile with the name of the building. It also has the streets around the building with some taxis driving around. The tiles are offset to have a small sidewalk and then you can see the first floor with the “glass” layer before the building is started. Bag 1 also starts the base structure of the building itself. The build has a lot of SNOT usage as you can see with a lot of studs pointed out.

The second set of bags completes the base levels of the building and then starts to build up. You can see how the structure continues to have numerous studs pointed out to help capture the outer portion of the building made with the 684 1x2 grill tiles included in the set.

There are some interesting techniques used in this build to include placing tiles vertically in-between studs. I don’t think I’ve ever seen this technique used before, but I like the concept and will look to use it in the future.

The third set of bags starts to go vertical. You can see all of the 1x2 grills going into place. As a close up photo of the model, it doesn’t look that great as you can see all of the studs underneath. From further away it doesn’t matter as much so I’m not going to complain here.

Bag 4 really makes the building form into shape (and my camera didn’t know where to focus). It gets a bit repetitive so if you don’t like placing 1x2 grills or repeating sides, then this set may not be for you. I like how you can use LEGO bricks to make realistic looking models so I’m okay with the repetitive build.

Bag 5 finishes the set off. It adds the final details to the building and then the top. I like the use of the silver colored pieces on the top.

Overall, I like the set. It’s a realistic build and I think it will make a great display piece in a future brick cave for me. I’m glad I picked the set up at a discount. While it is a decent price per piece, a lot of the pieces are very small so it is to be expected. Definitely look to see if you can find it discounted like I did.

I hope LEGO puts out more sets similar to this one in the Architecture line. What are your thoughts?

Happy building!