Set Review - #10318-1: Concorde - LEGO Icons

LEGO has gone into some different directions over the past few years and this set is another venture into something we haven’t seen before. #10318-1: Concorde is a model of the first supersonic, commercial airliner the world has seen. This set was released in the US on 4 September 2023. It contains 2,038 pieces and retails for $199.99. At that price, it works out to $0.096 per piece which is right about the 10 cent per piece average we all tend to use as acceptable for a set.

I ordered my set online from LEGO Shop @ Home. It arrived in it’s own box with some damage to the shipping box that caused damage to the set box (thanks UPS!). Nothing major and the set was still intact, but kind of disappointing.

The front of the box shows the full set built minus the stand. It has the set name printed in the same font as printed on the aircraft. It also contains the Airbus logo. The box back includes some cut aways of the set to show what it looks like inside the various parts of the set. It also has a diagram showing the length of the set and a picture of the actual aircraft.

The set contains 12 parts bags and then another box inside with more parts bags. In the end you get 21 numbered parts bags with one bag per number. You also get a paper bag with the cockpit wind screen. This is my first look at the new paper bags. They look okay to me. I’m glad LEGO made the switch to something a little more Earth friendly. The instruction book comes in a paperboard envelop so it’s nice and protected.

The instruction book includes details on the aircraft, its design, and information on the LEGO design team.

Bag one starts off the build of the wing. It starts with the back of the wing and starts to move forward. The center of the wing box starts to build the hardware that will work the landing gear movement.

Bag two continues to move forward with the delta wing and Technic pieces to continue the gear mechanisms. Additionally, you build some orange pieces into some parts that help you build the wing assembly. These pieces clip on and are removed later on in the build.

I failed to take separate pictures of bags three and four. They build out the wing further and you get some of the main hardware of the rear landing gear assemblies.

Bags five and six continue to build out the wing box and the center fuselage section with the landing gear mechanisms. The bag five picture is of the top of the aircraft and the bag six picture is the bottom of the aircraft.

The orange build support pieces are removed at the end of bag six. Bag seven continues the wing build and adds on some larger pieces as the top of the fuselage. These pieces have printed windows on them. Bag eight continues the wing, Technic parts, and fuselage.

Bags nine and 10 build the forward edge of the delta wing and then the front fuselage section of the aircraft without the nose section. The bag 10 picture shows the place where the front landing gear will be stowed. For bag 10, you really had to pay attention to how the Technic pieces were assembled, but I think the instructions did a good join pointing that out. You install more orange plates for ease of build in bag 10. These are removed shortly, but they help to keep the set together during assembly.

Bags 11 and 12 start to look more like an aircraft with the wing compete. You also start to build the fuselage out more. Bag 12 includes a small section of the passenger compartment with two bathrooms and some seats. This is the only section of the aircraft with an interior and I’m okay with that. It’s a display model and not a play model (in my opinion).

Bag 13 adds in the wheels and completes the landing gear. The Technic axle in the rear of the aircraft is what will spin to raise and lower the gear. It’s an impressive assembly and I’m a fan of how the design team put it together.

Bags 14 and 15 add the engines on either side of the aircraft. The builds are mirror images of each other, but the slight repetition wasn’t too bad.

Bag 16 begins the cockpit assembly. It doesn’t look like much when completed as you can see, but it will come together in the next bag.

Bag 17 finishes the cockpit area along with the paper bag that was included with the windscreen piece. I was thankful for the printing and no stickers. The set is mostly white, but the red stripe and logo help to distinguish the set. As advertised, the nose does the “droop snoot” movement like the actual Concorde did which is some great functionality for the large set.

Bags 18 and 19 add the tail section of the fuselage. Bag 18 is mostly internal structure and then bag 19 adds the external panels and connects the section with the rest of the aircraft. Spinning the tail cone section will raise and lower the landing gear.

Bag 20 completes the aircraft. This includes the ailerons and flaps on the main wing, the tail, and rudder. This is all minor functionality, but another great addition to the model to make it seem more realistic.

Bag 21 finishes the build with a stand. Despite the massive size of the model, it all sits rather well on this small stand. The stand also includes a printed tile with studs on the back. So glad that it wasn’t a sticker!

Here’s the final monstrosity. It was a great build and I think it looks incredible. Despite the abundance of white pieces, there are a lot of great pieces for future MOCs (inside) if that’s what you do with your sets. I really enjoyed this one and would recommend it to anyone, but I will say that you need to consider your space limitations. It’s big and finding a spot for it could be a challenge if you don’t have a dedicated LEGO display location. Maybe hanging it from a ceiling would work? I haven’t found a spot for it yet.

I think it would be great if LEGO did more sets like this one. Is anyone else on board with that thought?

Happy building!

Set Review - #21343-1: Viking Village - LEGO Ideas

It’s LEGO Ideas set #51! This one is #21343-1: Viking Village. It is the result of the LEGO X Target fan vote that took place in May 2022 between this design and two other designs that reached 10K votes, but were not selected during their original reviews. Thankfully, this set is not exclusive to Target as you can buy it from LEGO as well. The set was released on 1 September 2023. It contains 2,103 pieces and retails for $129.99 in the US. This works out to $0.062 per piece which is quite good.

The box is black with the 18+ greebling and the Ideas logo. The front of the box shows the front of the set while the back shows another view and some of the play features of the set.

The set contains 15 numbered parts bags and two plastic rope strands for the rope bridge. The instruction booklet is in a cardboard envelope for protection. The instructions include details about Vikings, the fan designer, and LEGO designers .

The first bag builds a base to what will be a blacksmith’s hut. Like many of the recent sets, this one does not have a base plate, but instead puts plates together to create the base. The plates are light blue to capture that this village is near the water. Bag one includes a female minifigure. She has a paint brush and a hammer which has printing on it.

The second bag adds some details to the base and then builds up the structure of the blacksmith hut area. It comes with some extra gear stored on the wall and in a barrel nearby. Additionally, there is a simple Technic built function that lets you shoot the flames up as the metal worker is working. I like the use of the decorative, curved piece colored in white as chimney smoke.

The third bag finishes up the shop area and tops it off with a roof. The roof is removable in one piece so you can get inside as you need to. There are also a number of trees and plants on the outside added in. Most have white pieces on top for snow.

The fourth bag builds a base for what appears to be a main chamber type building. It includes a small fire pit in the middle of the base. This bag comes with a male minifigure equipped with a bow and arrow and a quiver of more arrows.

The fifth bag adds in some details to include a back wall with a throne in front and then the start of a front entry way. There are a number of printed tiles in this build and thankfully no stickers. Yay!

Bag six adds more details to include the side walls, turning the fire pit into a cooking area, and adding in some cooking gear, weapons, a cup, and a small lantern. This bag also adds in a male minifigure who appears to be the lead Viking. I failed to take a picture of it, but you’ll see it later in the review.

The seventh bag adds in some banners on the walls as tiles inside, front doors that pivot open and closed, and then the pitch section to create the angled roof.

The eighth bag completes the roof. The roof is held on by gravity and includes a roof/chimney section in the center. I like the details and coloring. It’s pretty simple, but achieves the desired effect. Plus there are gold colored hot dog pieces.

Bag nine starts the base to the next section of the build.

Bag 10 adds in some pieces assembled which end up as rock stairs and then some drying fish on a pole.

Bag 11 builds more base which attaches to the base from bag nine.

Bag 12 connects the two bases and adds in a lookout tower, some kegs of a beverage, and adds a female minifigure holding a shield and ax.

Bag 13 adds a small room on top of the small hill-like structure with the steps leading up to it. There is a door to get in and a ladder to climb up. Inside are a few food items and a small shelf. The windows have an interesting design for a window awning. I like how they used rod connecter pieces of different sizes to make it work.

Bag 14 adds the rope bridge. It uses the two rope pieces included in the set and then you add each of the bridge steps. It’s a little challenging to attach it all, but I managed.

The 15th and last bag adds walls and a roof on top of the room on top of the hilly area. The roof is built in a similar style as the throne room building.

The set comes with four Viking minifigures. I used my own plates to get them to stand up. You don’t get the plates in the set (sorry). Each comes with their own weapons/gear. I like the styles and I’m glad they have fun facial expressions. While I’d always like to see more minifigures, I think four is a decent amount for this set. If you are looking for more Viking minifigures, check out the Bricks for Bricks Bricklink store to grab some more.

Here’s the final build front and back. From a price standpoint, it’s not too bad, but there are a lot of smaller pieces so that could be part of the reason for the low price per piece ratio. It is a pretty sizeable set though. When you connect the different sections it adds up to 18 inches long. The set has good playability and could easily be added to a larger Viking MOC if you wanted to. It was a fun build and has some good pieces. Not a lot of varying colors, but that’s to be expected considering the theme. Getting the four minifigures is a win too. Overall, I recommend the set. It’s a great build with a lot of potential. Maybe if you wait a year or two, it’ll even go on sale…

What are your thoughts?

Happy building!

Set Review - #21342-1: The Insect Collection - LEGO Idea

It’s the 50th LEGO Ideas set. I’m surprised LEGO didn’t make a big deal out of this one. Usually they celebrate all kinds of anniversaries. Oh well. #21342-1: The Insect Collection was released on 4 September 2023 for $79.99. It contains 1,111 pieces which works out to $0.072 per piece which isn’t too bad. A lot of the pieces are smaller, but some are special printed or unique pieces so that may make up for it.

For the review, the front of the box shows the three different models with the set name and Ideas logo on the top. The back shows another view of the set and some close up shots along with a display suggestion.

The set contains seven numbered parts bags. Bag one contains a piece separator. There are then four instruction booklets that come in an envelope (Thank you LEGO!). The first book gives some detail on the models and designers. Then the remaining three are for each of the builds.

The first bag begins building the Blue Morpho butterfly. It builds a base with a brick built plant or stick coming out of the base. Around the base are a few flowers and other plants and leaves.

The second bag adds the butterfly. The first instruction book shows the fan designer build of the butterfly which was built with SNOT techniques. This one is made with plates and tiles stacked on top of each other. The advantage is that they have some printed tiles on the edges of the wings. The disadvantage is the build isn’t as exciting due to the techniques used. It still looks great though as a blue butterfly with the different shades of blue. You also get a miniature honey bee. The bee is fun although I would rather have had a larger sized bee like the fan designer originally submitted. I guess this bee is more to scale so it fits into the scene better.

One bonus though is everything is printed. There are no stickers. YAY!

Bag three starts the Hercules Beetle build. The build starts off with a base similar to the last build. Then you add on a piece of a plant or a branch that the beetle is crawling on.

The fourth bag begins to build the beetle. It’s an interesting build with some fun techniques. The horn piece is big. I’m not sure if they are unique to this set or not, but it would have been interesting to see if they could have built it with additional pieces instead of one larger piece.

The fifth bag finishes up the beetle. You add in two blue mushrooms and then finalize the beetle. Besides the legs, you add in the wings and the covering of the back of the beetle (I’m not sure of the official term for it). You can pose the beetle with the wings out or remove the wings and have the yellow pieces covering the back. I like this feature and decided to picture it as if it’s just taking off from the branch.

The sixth bag starts the build for the Chinese Mantis. You start with the same base that the other two insects are on. Then you build a small stem with some leaves and flowers on it. There are also some round 1x1 red tiles printed as ladybugs. The fan designer submitted a larger scaled ladybug to Ideas and I would have preferred that as well, but I’ll take what they created.

The seventh and final bag adds in the Chinese Mantis. The designers did a good job capturing the shape and details of the insect. I like the use of the pistols at the bottoms of the legs and crow bars for antenna.

Here are the final builds. Definitely something outside the ordinary sets we see so that’s good. I would have liked to see more of the fan designer submissions (larger ladybug and bee), but I can’t complain with what we received. These are definitely display pieces which is fine for the 18+ audience in my opinion. Pricewise, it’s not bad considering the price for piece and maybe as it gets closer to retirement, we’ll see it go on sale which would be awesome.

What were your thoughts on this one? Can you mix them in with some of your Botanical sets?

Happy building!

Set Review - #76419-1: Hogwarts Castle and Grounds - Harry Potter

How many different versions of Hogwarts Castle can LEGO come up with? We’ve had all of the minifigure scale modular sections and then #71043-1: Hogwarts Castle which is about half of the castle. On 1 September 2023, we got #76419-1: Hogwarts Castle and Grounds. This one contains 2,660 pieces and retails for $169.99 which works out to $0.064 per piece. This Hogwart’s set is the first one that has the full castle all in one set. It’s a much smaller scale than the others, but it works and still captures a bunch of details. Onto the review…

The box front shows the full set build. There’s a Harry Potter logo and the 18+ greebling on the bottom. The back of the box shows some of the details of the set and the other side of the set.

The set contains 22 numbered bags with one bag per number. There’s also a 16x16 black plate and then the instructions are in an envelope. There are two instruction books. The instructions start with some details on the set and the castle. Throughout the instructions, there are various notes about some of the sections of the castle.

Of note, I did find at least one error in the instructions where they listed the wrong piece and showed a different one being installed.

The build starts with some of the sections underground. Bag one builds the chamber of secrets and then the Devil’s Snare. Bag two builds the room where they chase the keys, the Wizard’s Chess board, and then the room where Harry meets Professor Quirrell and finds the Sorcerer’s Stone.

Bags three and four build out more of the base and some of the cliff sections around the castle. Of note, you get a 1x8 black tile with “Hogwart’s Castle” printed on it similar to how the Architecture sets are built.

Bag 5 continues to build out the base of the castle and more of the cliffs around the edges. Then bag 6 starts to build the top with a lot of olive green pieces for grass coloring and a bunch of jumper plates to hold future sections of the castle. There are also some light gray tiles as walking paths around the castle.

Bag seven builds the last underground section which I think is Snape’s potions library (maybe). Bag eight continues the base to include more of the cliff edge and a pathway made up with some sloped dark tan sloped pieces.

Bag nine adds more of the cliff section and some plates to build up on. Bag 10 adds in the boat house at the end of the dark tan path you build.

Bag 11 adds in a lot of the water pieces. I like the use of dark and light colored translucent blue tiles to make some different colored water. You also include a section in the bottom right which is where the Durmstrang Ship will go later on in the build.

Bag 12 starts the Great Hall. I like how this one is buildt separately and then added to the rest of the castle at an angle.

Bag 13 finishes up the Great Hall and adds it to the rest of the build. As mentioned, I like how it’s installed at an angle. You also add the bridge which works out okay, but the supports don’t quite touch the bottom so it looks a little odd if you look closely.

Bag 15 tops off the quad area and then the Headmaster’s Tower. Bag 16 builds another section of the castle. The instructions say that this area contains the girl’s lavatory area where Moaning Myrtle lives. I appreciate how some of the building techniques create the details and then there are some printed pieces mixed in. Thankfully, no stickers. YAY!

Bags 17 and 18 build the East Wing according to the instructions.

Bag 19 builds the astronomy tower which is the tallest point of the castle and is built using some SNOT techniques.

Bag 20 starts a corridor section that is completed in the next bag. More printed bricks again which is great.

Bag 21 finishes the corridor in this section of the castle and then adds in the greenhouses. It also adds in some walls and some gemstone and ice cream pieces as miniature trees and plants.

Bag 22 is the final bag in the set. It builds the Whomping Willow, the Durmstrang Ship, the Pegasus and Beauxbatons’ Carriage, and then finally the Architect of Hogwarts golden minifigure. The first three are all fun miniature builds and if you know the Potter world, you can easily pick up on what the builds are representing. The minifigure is a nice addition to the set and to the gold anniversary minifigures, but it really isn’t a known character. It’s fun that they came up with an idea of what the architect might look like, but I don’t see this minifigure as a must have collectible just based on it being a made up character. I guess it’s better than yet another Harry Potter minifigure.

Durmstrang Ship

Pegasus and Beauxbatons’ Carriage

Architect of Hogwarts

Whomping Willow

Here is the final build from a few different angles. Overall, it’s a great set. You can buy the various sets to piece together the castle or get the larger castle, or just get this one and be done (assuming you don’t collect minifigures). It’s great that you get the full castle and a bunch of details from the books in one set. The minifigure isn’t a standout to me, but it’s nice that they included one. The price per piece is good although the pieces are a bit smaller so you would hope that would be the case. If you’re a Harry Potter fan or enjoy Architecture themed sets, I highly recommend this one. Look for opportunities to grab this one with double Insiders points or great GWP offerings in the future.

Happy building!

Set Review: #76413-1 - Hogwart's: Room of Requirements - Harry Potter

Here’s a review for #76413-1: Hogwarts™: Room of Requirements. This one was released on 1 March 2023 and retails for $49.99 in the US. It contains 587 pieces which puts it at $0.085 per piece. I grabbed this one on sale from LEGO Shop @ Home with GWPs so even better. This is not the first venture into this section of the castle. This set focuses on a scene from the last book/movie “The Deathly Hallows”, but we had #75966-1 back in 2020 which was from “The Order of the Phoenix” book/movie which focuses on a separate scene in the room with a different purpose.

Nothing overly special about the box. It is pretty standard with how the front and back usually look for a Harry Potter themed set.

The set contains four numbered parts bags, and instruction booklet, and a sticker sheet. My sticker sheet was smashed into the box and had a pretty sharp crease in it. I was not happy with that, but thankfully, it didn’t wreck the overall look of the set when I was done putting it together.

Unlike most Harry Potter sets, the first bag actually starts with the top of the structure. You build a small roof section and then a larger one with a spire. The one with the spire has a space underneath the spire where a scroll is set for reading. I’m not sure what the reference is to in the movie exactly so it’s relevance in the set is unknown to me.

You get two minifigures in this bag. One is Harry and the other is “The Grey Lady” (Rowena Ravenclaw’s deceased daughter).

The second bag assembles the ground floor of the build. This is the entrance to the Room of Requirements. There is a door (with stickers that you put on both sides) and then the inside starts to build all of the various things that are stored in the room with two cases with cups in them.

There are some straight and curved tiles placed around the door frame on the inside of the room. These tiles have stickers. I had a challenging time putting the stickers on the 1x6 pieces and an even harder time trying to line up the curved stickers on the curved tiles.

The Draco Malfoy minifigure comes with this bag.

The third bag adds more to the room to make it taller. You also tack on a few more stickers for details. You see a number of Technic axle and pin holes throughout the build which will make more sense after the next bag.

On the outside of the build you put together some doors/wall pieces that slide back and forth so you can cover the door to the room similar to the movie. It’s not flush with the wall like in the movie, but it gets the job done considering the cost of the set and the space available for the build.

The Hermione minifigure comes in this bag.

The last bag wraps up the set with a lot of the various items inside the room of requirements to include boxes, books, a chair, a helmet, a record player, and the lost diadem that they are searching for in the movie/book.

The minifigure in this bag is Blaise Zabini who I don’t remember from any of the other movies, but it could just be me.

Lastly you build the fire dragon that Blaise casts in the Room. You can have the dragon as one long piece or you can split it up. The set comes with some extra Technic pins so you can connect the dragon to the various pin holes around the set. This is a fun play feature and I like how the designers added this one in.

5 minifigures in this set. All are exclusive so even if you thought you had all of the Harry Potter minifigures, there is yet another one. No major complaints here, but nothing super exciting.

Here’s the final build. Like the other sets, this one is modular and connects to the various Harry Potter sets to help you build out a full Hogwart’s Castle however you want to. The set has some good play features with the moveable doors in the front, the fire dragon that can be moved around, and some stuff to scatter around the room. You can also use your own pieces to add to the clutter in the room.

Overall, it’s not a bad set and the price per piece isn’t too bad. It’s gone on sale once so wait for another round of sales before you grab this one.

Happy building!

Set Review - #76420-1: Triwizard Tournament: The Black Lake - Harry Potter

Another Harry Potter set…. This one is #76420-1: Triwizard Tournament: The Black Lake. It was released on 1 March 2023 and it contains 349 pieces. It retails in the US for $44.99 which puts it at $0.129 per piece. I picked this one up on sale during the Back to Hogwarts event LEGO held for $5 off and with two GWP sets. It’s priced pretty high from a price per piece standpoint.

The box is pretty similar to most. The front shows the set apart with the above water section separated from the below water section. All of the minifigures are shown under water. It has the standard logos for Harry Potter sets. And the warning that the boat doesn’t float. The back shows some more play details for the set.

This set contains four numbered parts bags, an 8x16 plate, and the instruction booklet.

The first bag assembles the first section “above the water” for the set. This portion is just the structure for the upper level and then the stand where the characters jump into the water. There is a fairly simple Technic build that can be used to tip up a tile to have the characters “jump.” Additionally, this bag comes with a small row boat that fits one or two minifigures. The Harry Potter minifigure comes in this bag. His head is dual sided with the gills from eating the gillyweed. One side is smiling and the other is mad. His outfit is a red shirt with his house logo on the front and his last name printed on the back. He also comes with some skin colored fins to look like how his feet change into fins after eating the gillyweed. He also has a wand.

The second bag builds the upper level. This section comes with some great sand green colored pieces that look like they came from an Asian themed build. Inside the stand is a table with some mugs, a tea/coffee pot, and a container of sorts on the floor. There is a ladder piece to allow characters to climb up. The top of the structure has a printed clock tile piece. This piece is hooked to a Technic pin and then a ball on the back to spin the clock around. Viktor Krum comes as a minifigure in this bag. He has a face and hair piece and then you can spin his head to show a tongue that fits in with the shark piece to fit over his head.

The third bag starts the under water section of the build. It uses a few BURPs (or are they LURPs?) and then other dark blue and sand green pieces. You attach the chains to be where two of the figures are put under a spell to be rescued by the tournament participants. There are a few plants and then a crab and a fish as well. This bag contains Ron and Hermione along with one of the under water creatures (not sure of the official name). Ron and Hermione both have dual printed heads. One side is the underwater, asleep face and the other is the awake and smiling face.

The fourth bag finishes the build by completing the arch piece under water. It uses great colors to include sand green and teal. I like the use of the brick textured sand green pieces. This bag also comes with a mermaid minifigure. She has a dual printed head and comes with a trident. I forgot to throw her in this picture, but you’ll see her later.

Here are the minifigures. They are original to this set so a must buy if you collect Harry Potter minifigures. Otherwise, it’s just more Harry, Ron, and Hermione minifigures. Victor isn’t one you get often and the mermaid is also an original. Plus the shark part is cool. It’s disappointing they didn’t include Fleur and her sister. I’m sure that was due to cost and wanting to keep the price of the set at a specific level.

Here’s the final set. Overall, it’s a decent small build with some okay techniques besides just stacking bricks. You get some good piece colors and some unique minifigures so that’s a bonus as well. I do think the set is overpriced for what you are getting so look for opportunities to grab this one on sale or with GWPs. If it already went on sale once and it was just released in March, I’m pretty sure you’ll see it on sale again and it’s not even near the end of its shelf life.

Happy building!

Set Review - #71039 - Marvel Studios - Series 2 - Collectible Minifigures

More collectible minifigures! This series is #71039 - Marvel Studios - Series 2. This set of 12 minifigures was released on 1 September 2023 for $4.99 each. Instead of bags, this series comes in cardboard boxes in order to save on the environment. I applaud the initiative, but if you haven’t seen any of the pictures online, the world has torn open the packages to find the minifigures they wanted since the feel technique doesn’t work anymore.. I purchased three packages of six minifigures each online. Surprisingly, with 18 minifigures, I managed to get all 12 in the series so that was a bonus.

I’m not a fan of Marvel so I can’t tell you details on these minifigures or how close or not they are to the actual characters. In this review, I’ll just point out some of the things I noticed about each figure.

Overall, no major complaints on this series. I recommend it for Marvel fans or CMF collectors. Otherwise, save your money for others.

Happy building!

---

Agatha Harkness - This minifigure comes with a book, cape, and two flicker shooter pieces (not sure of the official term). It comes with a jumper plate and one of the pieces to make it poseable, but she has a slope brick for a dress so you can’t really pose her. They could have done without the poseable piece for this one.

Moon Knight - I’m not sure who this minifigure is, but the little gold moon piece and coin is interesting.

---

She-Hulk - This minifigure comes with a few printed tiles so that’s a bonus. I like the face color and the hair piece color as well.

Hawkeye - The character doesn’t interest me much, but it comes with a small owl, which is great!

---

Kate Bishop - The printed tile pizza box is great. The dog has one eye printed on it, which I guess is on par with the actual character from what I read and is not a misprint.

Goliath - This one looks cool Not sure who he is. You can put the hair piece on if you don’t want the helmet.

---

Echo - I have no idea what this minifigure is holding. The printing on the pants and torso are interesting.

Beast - Again, no idea who this character is, but the blue hair piece and face look cool.

---

Mr. Knight - I like the fish tank printed on the 1x2 clear brick. The minifigure doesn’t do much for me.

The Werewolf - I’m not a fan of this minifigure, but I also don’t know the character so maybe that’s why.

---

Storm - The white hair piece is a cool piece.

Wolverine - I’ve seen Wolverine minifigures in the past. I’m not sure how this one compares, but it looks okay Like some of the previous ones, you get a hair piece and the mask.

Set Review - 2023 Harry Potter Brickheadz Sets - #40616-1, #40617-1, and #40618-1

Three Harry Potter themed Brickheadz sets were released for 2023 on 1 June. Instead of three separate reviews, I decided to combine them all into one. I don’t collect all of the Brickheadz sets, but I do get the ones that interest me. As a Harry Potter fan, I grabbed these during the LEGO “Back to Hogwarts” sale event. Overall, they are in line with the Brickheadz theme. If you aren’t a fan of them or of Harry Potter, don’t bother with these. If you are a fan, look for an opportunity to grab them. Maybe during a double VIP point event or if you can find them on sale somewhere.

The first one is #40616-1: Harry Potter and Cho Chang. These are Brickheadz numbers 207 and 208. The set contains 267 pieces and retails for $19.99 which works out to $0.074 per piece. The box front shows the two characters. The back (not pictured) shows the same and how you can place the characters on a plate as a base. The set comes with four parts bags numbered one and two. There are two instruction booklets included. One for each character.

Not too much to talk about for the build. They are the standard Brickheadz build. Both characters come with printed tiles for the eyes and front of the shirt. Harry has a printed tile for the scar on his forehead. Harry’s face is a fun build as you install some pieces that are not clipped in by stud connections. They just rest in place and then other pieces hold them there. A fun little technique. If you don’t like the characters, LEGO always puts a few interesting colored pieces in the center and then I’m a fan of the dark red and blue colors as you get a few of those as well.

Next up is #40617-1 - Draco Malfoy and Cedric Diggory. Draco is #209 and Cedric #210. This set also retails for $19.99 and contains 262 pieces. This works out to $0.076 per piece. Similar to the previous set, the box has the characters on the front and the numbers and names of each on the bottom of the front. Inside are four parts bags numbered one and two with two bags for each number. There is an instruction booklet for each character.

The builds for these are not super interesting. Their hair is slightly different, but beyond that and brick colors, these builds are pretty similar. I guess the goal was to get students from each house so students from two houses in the last set and then the last two houses here. One difference is Draco is holding a gold trophy cup so you do get that additional part. As I mentioned at the beginning, if you’re a Brickheadz collector or a Harry Potter fan, then go get this set. If not, I’d avoid this one as it’s not super exciting to build and doesn’t have a ton of unique pieces.

Last set is #40618-1 - Kingsley Shacklebolt and Nymphadora Tonks. Kingsley is #211 and Nymphadora is #212. This set also retails for $19.99 and contains 250 pieces. It has the lowest piece count of the three sets which puts it at $0.079 per piece. Still not bad, but the worst ratio of the three. As with the other two sets, similar box art and contents inside the box.

Of the three sets, I enjoyed building this one the most. Kingsley has his head cover which is a cool looking printed, sloped piece that goes all around his head. It’s obviously not completely round, but I like how they created that effect. Nymphadora uses a fun lighter colored purple for the hair which was a nice change to see a different color. Beyond these two bits, they still mostly follow the Brickheadz standard so you’re not getting much else super exciting. Like the other two sets, great for Brickheadz and Potter fans, not so much for everyone else. Thankfully, there is a ton of other sets out there you can pick up based on what you like so it’s not a big deal.

Happy building!

Set Review - #76402-1: Hogwart's: Dumbledore's Office - Harry Potter

As we approach the time period closer to Christmas, a lot of retailers are putting more items on sale to include LEGO sets. #76402-1: Hogwart’s: Dumbledore’s Office was released back on 1 June 2022 in the US for $79.99. It contains 654 pieces which works out to $0.122 per piece. I this this is too steep. I picked it up on sale for $64 at Walmart, which works out to a more reasonable $0.097 per piece. Keep waiting and maybe you’ll see it go on sale for even more as it should be retiring at the end of this year.

This set connects to other sets in the line in a modular fashion so if you’ve been collecting them all, you can add this one to the bunch. You get six minifigures in this set and three of the printed collectible tiles. I started the build with 14 of the 16 tiles and picked up one more. I’m still short one tile, but I’m not bothered by this.

The box is pretty standard with the full set on the front, Harry Potter logo, a minifigure line up, and pictures of the movie characters. The back shows some play details and the back of the set along with a note about the printed tiles. Maybe it’s just me, but the box feels kind of small for a $80 set. Onto the review…

The set contains five numbered parts bags. The instructions are bagged along with the stickers. There is also an 8x16 tan plate.

The first bag starts to build where the actual desk of Dumbledore goes. It builds a small platform and includes some clear pieces as two flask type items. This bag comes with a Harry Potter minifigure wearing the cloak of invisibility and holding a wand and lamp. It also comes with Dumbledore.

The second bag wraps up most of the office area. It builds up two book shelves, some props on the desk, and has a place for the sorting hat and a small Fawkes to sit on a perch. This bag comes with a Mr. Filch minifigure and his cat.

The third bag adds another level with the pensieve (bowl you can drop tears into to view memories). This doesn’t quite match the movie as the pensieve is actually in the office and not a level above. On top of this level is another level with the sword of Gryffindor. Again, the sword, when it’s in the office, is in the office and not on a separate floor. From the front, it’s a decent design with the elements you’d expect in a Hogwart’s type build. This bag comes with a Professor Snape minifigure.

The fourth bag builds the bottom layer of the set which is the library. This bag builds the floor and a book shelf. As part of the book shelf, you attach some books to leaf pieces on the outer wall. The leaf is attached to a tile that can slide in and out to make the book pop off the shelf. This is done twice.

The Madame Pince minifigure comes in this set. I had to look up who she is in the books/movies. Apparently she’s the librarian. Shows how much I know…

The fifth and final bag wraps up the build with completing the bottom floor. It adds a few desks in the library and sections of the library that are on plates connected by hinges to the rest of the build. You can fold them in or out depending on how you want to play with the set. A Hermione minifigure comes with this bag.

As mentioned at the beginning, the set comes with six minifigures. They are all pretty common except for Madame Pince so nothing to get too excited over. Harry does come with the cloak of invisibility, but you would already have it if you collected Series 1 of the Harry Potter minifigures (although that Harry is wearing pajamas in the CMF series).

Here’s the final build. I don’t have the other sets built to show the connection, but alone, I wasn’t too impressed by this set. The minifigures were just okay. You do get a few fun pieces like a small Fawkes and the sorting hat. If you’re looking to pick this one up to add to your castle, definitely don’t pay full retail price. Look for a sale or some good deal to cut down on the price.

Happy building!

Set Review - #10320-1: Eldorado Fortress - LEGO Icons - 18+

Pirates!!!!!!!!!! Actually this one should say Imperials!!!!!!!!!!! First time we’ve had new Imperial Soldier minifigures in a while. This set is a re-make of #6726-1 from 1989. It is #10320-1: Eldorado Fortress. It contains 2,509 pieces and retails for $214.99 in the US. This works out to $0.086 per piece which isn’t too bad. The release date in the US was 4 July 2023 and it’s still available at the time of this post.

The box is in the old school style of boxes similar to #21322-1: Pirates of Barracuda Bay and #10305-1: Lion Knight’s Castle. The front has the yellow stripe in the upper left with the set name. and then a full picture of the set. The back has various scenes of the build with a map background.

Here are a few pictures on the sides of the box. One shows all of the minifigures and the monkey. Another shows the set and how it is modular so you can connect the pieces in different ways to change around the fortress.

The set contains 10 sets of numbered parts bags with most numbers having more than one bag. There is an unnumbered bag with some larger plates. You also get the instructions in a paperboard envelope and an envelope with the sails. I had one sail with a slight fold in it, but I was able to undo the fold without any issues. They showed up in good condition otherwise.

There are four instruction booklets in this set. The first booklet contains some information about the set to include history of the Pirates line and the old set and how some of the previous sets inspired this set.

The first bag builds a row boat for the pirates and includes to pirate minifigures. One minifigure is a female and the other is a male. You also build a small ship. This ship is modeled after the ship from #6277-1: Imperial Trading Post that was released in 1992. The ship comes with a female officer figure. The tricorne hat has long hair attached to help show it’s a female.

Bags two and three start the base of the first section of the fortress. Unlike the original version which had a large baseplate to build on, this set connects numerous plates as a base and then you build on top. This does mean you connect a lot of dark grey pieces to get the side of the fortress and its textures, but you also get the sea color and land colors separated versus the single colored base plate. The second bag builds a ramp which was just part of the printed baseplate on the original set. I like how this was done to achieve the angle and to capture the look of cobblestones.

I failed to get a picture after the fourth bag, but bag five wraps up this section of the build. You add a palm tree, an entryway with doors, a stand for a cannon on the upper level, an office for the governor, and you get a large Imperials flag. There’s also another section that is lower with another cannon that can be rotated. Behind the walls is a small stove and clips to hang numerous extra weapons.

The set has a bunch of hidden sections to include a small container with a printed 1x2 tile letter piece and a barrel with coins in it. The coins are 1x1 round printed tiles versus the old gold coins LEGO used to produce (which were much cooler in my opinion).

The sixth bag adds another section. This one is also three stories. The lower level is a cave section with wine barrels above an empty treasure chest. The tapped barrel leaked some with the small 1x1 tile that is partially rounded to be the “drop” on the floor. The next level contains a small space where another barrel is stored (empty), and sack of loot, and a broom. There’s a ladder here that goes up to another cannon. There is also a parrot included in this section.

The front of this section contains two palm trees and a small sandy beach.

This bag came with a soldier. It’s a female soldier with a rifle and back pack of gear.

The seventh bag builds a dock section. The dock has four supports that can then be connected to the rock section which can connect to other parts of the fortress. The top of the dock has a small table with seats. The table has a few bowls, cups, a glass bottle, and a lamp. Built into the dock is also a trap door. There is a Technic built mechanism that lets you slide a piece over and the trap door opens up with gravity. Two minifigures come in this section. One is another female officer. She doesn’t have a weapon, but there are plenty of others to give her in the set. The other is a male soldier. He is similar to the last one only he has a mustache. Lastly, you get a small monkey in this set. I liked the original ones from back in the day with the minifigure hands, but this one works too.

The eighth bag builds another section. This one is most notable for the crane on top. The crane section spins around 360 degrees and can raise and lower the cargo. This section of the build comes with a chest with pistols. The instructions say to put two pistols in, but my set came with three pistols so I included them all. There’s a ladder up to the top level with the crane, but I’m not sure how a minifigure can get to this crane given it’s size.

The mid level of this section has a walkway and storage area with another empty barrel, a bag of loot, and some extra cannon shells (1x1 round bricks). Below this level is a tunnel section with water flowing through.

The ninth bag starts the last section of the fortress. You build the rock section over water with some hidden compartments. There is a trap door over a section with some gold bars (1x2 tiles) and a sack of loot. There is also a pathway with a pirate skeleton. Not sure how he got stuck in there or when. Also there is another trap door which ends up being a trap door in the prison cell to escape.

The last bag adds the top section to the ninth bag. This includes a prison cell with some straw on the floor. There are also a few windows with a cool roofing technique using some rounded parts. There is a ladder on the jail cell to allow soldiers to climb up above the cell.

Here are the minifigures minus the skeleton (which I forgot to take out of the build for the picture). You get three soldiers (two male, one female), two female officers, a male governor minifigure, and two pirates (one male, one female). Along with the skeleton, monkey, and parrot, there are a decent number of characters in this set. For comparison, #21322-1: Pirates of Barracuda Bay had eight pirate minifigures and two skeletons. This set has eight minifigures and one skeleton.

Here’s the final set arranged how I decided to arrange it. I like the modular option for this set where you can connect it how you want or split it apart as desired. It also allows you to add on other sections as you want since there are numerous openings to expand. I had a few Pirates and Imperials sets back in the day and it was fun to see these return. The price point is fairly reasonable. I would have preferred $200, but I understand LEGO is adjusting for inflation I recommend this one to adults looking to relive their childhood or to kids interested in playing with LEGO Pirates as there are a lot of great play features. Look for opportunities to pick this one up with double VIP points or interesting GWPs.

Happy building!